dc-dc converters pola non-isolated 1 new product file name: PTV05010W.pdf rev (02): 16 dec 2005 2 year warranty all specifications ar e typical at nominal input, full load at 25 unless otherwise stated c in = 100 ? and 10 ? (ceramic), c out = 0 ? specifica tions the ptv05010 is a non-isolated dc-dc converter from artesyn under the point of load alliance (pola) standard. the vertical mounting option of the ptv05010 module provides performance in less than 20% of the space that is required by alternative solutions. the auto-t rack? feature provides for sequencing between multiple modules, a function, which is becoming a necessity for powering advanced silicon including dsps, fpgas and asics requiring controlled power-up and power-down. the ptv05010 has an input voltage of 4. 5 vdc to 5.5 vdc and offers a wide 0.8 vdc to 3.6 vdc output voltage range with up to 8 a output current, which allows for maximum design flexibility and a pathway for future upgrades. ? 8 a output current ? 5 v input voltage ? wide-output voltage adjust (0.8 vdc to 3.6 vdc) ? auto-track? sequencing* ? pre-bias start-up ? efficiencies up to 95% ? output on/off inhibit ? vertical through-hole mounting ? point-of-load-alliance (pola) compatible ? undervoltage lockout ? available rohs compliant *auto-track? is a trade mark of t exas instruments ptv05010 5 vin single output output specifications voltage adjustability (see note 4) 0.8-3.6 vdc setpoint accuracy (see note 8) ?.0% vo line regulation ? mv typ. load r egulation ? mv typ. total regulation (see note 8) ?.0% vo minimum load 0 a ripple and noise 20 mhz bandwidth 15 mv pk-pk temperature co-efficient -40 o to +85 ? ?.5% vo t ransient r esponse 70 s r ecover y time (see note 5) overshoot/undershoot 100 mv input specifica tions input voltage range (see note 3) 4.5-5.5 vdc input standby current 5 ma typ. remote on/off (see note 1) positive logic undervoltage lockout (increasing) 4.3 v typ. track input current pin 9 (see notes 6, 7) -0.13 ma international safety standard approvals ul/cul can/csa-c22.2 no. 60950 file no. e174104 tv product service (en60950) certificate no. b 04 06 38572 044 cb report and certificate to iec60950, certificate no. us/8292/ul emc characteristics electr ostatic dischar ge en61000-4-2, iec801-2 conducted immunity en61000-4-6 radiated immunity en61000-4-3 general specifications efficiency (see efficiency table) 95% max. insulation voltage non-isolated switching fr equency 55-650 khz 600 khz typ. approvals and en60950 standards ul/cul60950 material flammability ul94v-0 dimensions (l x w x h) 22.86 x 8.38 x 10.16 mm 0.90 x 0.330 x 0.400 in weight 2.5 g (0.9 oz) mtbf telcordia sr-332 5,000,000 hours environmental specifications ther mal per for mance operating ambient, -40 o to +85 ? (see note 2) temperatur e non-operating -40 o to +125 ? protection over cur r ent auto r eset 12 a typ.
file name: PTV05010W.pdf rev (02): 16 dec 2005 for the most current data and application support visit www.artesyn.com/powergroup/products.htm dc-dc converters pola non-isolated 2 new product n n o o t t e e s s 1 remote on/off. positive logic on: pin 7 open; or v > (vin - 0.5 v) off: pin 7 gnd; or v < 0.6 v 2 see figure 1 for safe operating curve. 3 a 100 ? electrolytic input capacitor is required for proper operation as well as a 10f high-frequency ceramic capacitor. the electrolytic - capacitor must be rated for a minimum of 300 marms of ripple current. 4 an external output capacitor is not required for basic operation. adding 100 ? of distributed capacitance at the load will improve the transient response. 5 1 a/ ? load step, 50 to 100% i omax , c3 = 100 ?. 6 if utilized v out will track applied voltage by 0.3 v (up to vo set point). 7 the pre-bias start-up feature is not compatible with auto-track ? . this is because when the module is under auto-track ? control, it is fully active and will sink current if the output voltage is below that of a back-feeding source. therefore to ensure a pre-bias hold-off, one of the following two techniques must be followed when input power is first applied to the module. the auto-t rack ? function must either be disabled, or the modules output held off using the inhibit pin. refer to application note 195 for more details. 8 the set-point voltage tolerance is af fected by the tolerance and stability of r set . the stated limit is unconditionally met if r set has a tolerance of 1% with 100/ o or better temperature stability. 9 to order pb-free (rohs compatible) through-hole parts replace the mounting option ?ith ??eg. PTV05010Wad. 10 notice: some models do not support all options. please contact your local ar tesyn r epr esentative or use the on-line model number sear ch tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. output input output output output efficiency regulation model power voltage voltage current current (max.) line load number (9,10) (max.) (min.) (max.) (2) 28.8 w 4.5-5.5 vdc 0.8-3.6 vdc 0 a 8 a 95% ? mv ? mv ptv05010 ptv05010 5 vin single output part number system with options product family point of load alliance compatible mounting v ersion v = vertical mounting option (9) d = horizontal thr ough-hole (matte sn) h = horizontal through-hole (sn/pb) the ultra-wide output voltage trim range of fers major advantages to users who select the ptv05010. it is no longer necessary to purchase a variety of modules in order to cover different output voltages. the output voltage can be trimmed in a range of 0.8 vdc to 3.6 vdc. when the ptv05010 conver ter leaves the factor y the output has been adjusted to the default voltage of 0.8 v. o o u u t t p p u u t t v v o o l l t t a a g g e e a a d d j j u u s s t t m m e e n n t t o o f f t t h h e e p p t t v v 0 0 5 5 0 0 1 1 0 0 s s e e r r i i e e s s output current 01 = 8 a input voltage 05 = 5 v mechanical package always 0 PTV05010Wah pin style a = through-hole std. pin length (0.150 output v oltage code w = wide efficiency table (i o = i o max) output voltage efficiency vo = 3.3 v 95 vo = 2.5 v 93 vo = 1.8 v 90 vo = 1.5 v 89 v o = 1.2 v 87 vo = 1.0 v 85
for the most current data and application support visit www.artesyn.com/powergroup/products.htm d c-dc converters pola non-isolated 3 new product file name: PTV05010W.pdf rev (02): 16 dec 2005 figure 2 - efficiency vs load current vin = 5 v (see note b) figur e 1 - safe operating ar ea v in = 5 v , output voltage = 3.3 v (see note a) ptv05010 5 vin single output n n o o t t e e s s a soa cur ves r epresent the conditions at which internal components are within the artesyn derating guidelines. b characteristic data has been developed fr om actual products tested at 25 c. this data is consider ed typical data for the conver ter . figure 3 - standard application e f f i c i e n c y ( % ) output current (a) 3.3v 2 .5v 1 .8v 1 .2v 70 80 90 100 02 6 vout 60 50 48 0 .8v t e m p e r a t u r e ( o c ) output current (a) 20 30 40 50 60 70 80 90 02 6 48 n at conv 1 00 lfm 2 00 lfm 400 lfm 2 3 c2 10uf ceramic (requi red) c3 100uf o ptional vin vo rset 1% 0.05w t rack c 1 100uf (requi red) gnd inhibit gnd l o a d ptvxx010 5 4 1 6 7 8 gnd inhibit vo adj vo v in t rack
pin connections pin no. function 1 ground 2 vout 3 vout 4 vo adjust 5 t rack 6 ground 7 inhibit 8 v in file name: PTV05010W.pdf rev (02): 16 dec 2005 please consult our website for the following items: 4 application note www.artesyn.com datasheet ?artesyn technologies ? 2005 the infor mation and specifications contained in this datasheet ar e believed to be cor rect at time of publication. however, artesyn technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. the information and specifications contained or described herein are subject to change in any manner at any time without notice. no rights under any patent accompany the sale of any such product(s) or information contained herein. for the most current data and application support visit www.artesyn.com/powergroup/products.htm d c-dc converters pola non-isolated 4 new product figur e 4 - mechanical drawing ptv05010 5 vin single output front view side view 0.330 0.008 (8.38 0.20) 0.100 (2.54) 0.100 (2.54) 1234 6 578 pcb 0.150 (3.81) 0.400 (10.16) 0.900 (22.86) 0.025 (0.64) min 8 places plated through hole dimensions in inches (mm) tolerances (unless otherwise specified) 2 places 0.030 ( 0.76) 3 places 0.010 ( 0.25) 0.020 (0.51)
|
